Salta al contenuto principale

I am trying to repair a Realistic CTR-75 Cassette Voice Recorder

I need help with finding a belt schematic for a Realistic CTR-75 Cassette Voice Recorder. I got it working and I don’t know how to put on the new belts because the old belts were melting goo. Please help. My email is <redacted>

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 2
Aggiungi un commento

2 Risposte

Soluzione Prescelta

I am going to bet you, one of these will fit.

https://www.banggood.com/50pcs-40-130mm-...

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Thank you very much

da

Aggiungi un commento
Risposta Più Utile

Hi Benjamin,

Funny enough, I bought one used a few days ago, but it wouldn't play tapes. I just took it apart. The belts were still in place put became slack and would not create enough friction to move the wheels. There are two belts, one under the green circuit board, one to the side. You have to do the bottom one first as it runs on the bottom of the big silver "flywheel". I had to unscrew three black screws to lift the circuit board.

Black screws

Block Image

Bottom belt

Block Image

Top belt

Block Image

As you can see from my photos, I tried with standard household rubber belts. I think they are to short and a bit to tight. Tapes play, but rather slow. I'll be ordering some belts as suggested by @avanteguarde and see if that helps.

Good luck and let me know how it goes.

Best,

Jens

Questa risposta è stata utile?

Punteggio 2

1 Commento:

Thank you very much

da

Aggiungi un commento

Aggiungi la tua risposta

Benjamin Kitaura sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 26

Tutti i Tempi: 1,713