Aggiusta la tua roba Comunità Store

Device and repair information for the 60" LED HD TV by Samsung released in 2013, model number UN60FH6003FXZA.

203 Domande Visualizza tutte

Opzioni

UN65EH6000FXZA YH02 strobe backlights

Block Image

Block Image

Block Image

UN65EH6000FXZA YH02

I have a Samsung UN65EH6000FXZA YH02. The backlights strobe I get no sound no standby light or noise. I have replaced the main power board and get the same thing. When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still. But when I disconnect the back light and just have the control and tcon board connected to the board I get the standby light and it makes the start up noise. Do anybody have an i dea what is causing this and the part number i would need to fix it?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

jaded past "When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still." sounds like a failed backlight array or a bad power board. Post some images of all of your boards so that we can see what you see. Use this guide Aggiungere immagini ad una domanda for that. You can measure the voltage on the led connector to see if the "strobe" originates there. If not then you know it is most likely the array.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

How would I measure the voltage I honestly have never done that before. Tv powered on or off? Give me the steps and I can get it done and post my results. And again that is a brand new power board.

da

Aggiungi un commento

Aggiungi la tua risposta

jaded past sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 210