Salta al contenuto principale

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Domande Visualizza tutte

destoid pads for ipad mini

hey i was trying to fix the charging port port from an iPad mini 1 so i tried to desolder the charging port from the logic port and some plastic of the charging port stayed at the pads from charging port i was trying to clean it but 2 pads (the pads for data - +) broke up.. i search the pcb for ipad and i saw that they was under a tiny component that is so difficult to desolder and make jumpers... what can i do pleeasse help me

Update (10/25/2017)

those pads

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
1 Commento

You better take some good photos of it and post them, so we can get a better understanding of what you're talking about.

Aggiungere immagini ad una domanda

da

Aggiungi un commento

1 Risposta

Soluzione Prescelta

As George said, we would need a better visual of which pads were pulled to give a suggestion. Here is a pic with Ground pads in Red.

Block Image

Update: Here are the 5 pads you mentioned and where the jumpers would have to run for each :)

Block Image

Block Image

Block Image

Block Image

Block Image

Questa risposta è stata utile?

Punteggio 2

4 Commenti:

its very difficult to solder under some components its to tiny like a pencil tip

da

Yes, I agree...it looks like a pretty difficult repair. But if you have a "Micro Pencil" iron, a scope, very small jumper wire and solder mask...It should be repairable.

da

Aggiungi un commento

Aggiungi la tua risposta

Κωστας Λαζαριδης sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 334