Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Released September 25, 2015. Model A1687/A1634. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

838 Domande Visualizza tutte

Touch screen not working after screen replacement

Just replaced the touch screen on a friend's phone, and it's completely unresponsive, LCD works fine though. Old screen is also completely unresponsive with LCD working. Anything I can do to try and fix this or did I bust the connector on the motherboard itself?

Risposto! View the answer Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 4

Commenti:

I had this problem too after an iPhone 6S Plus screen replacement. I always test “before” I finish assembly and the digitizer was not working. I was holding the screen and the case so they weren’t touching. It turns out that the screen shield needs to be in contact with the case for it to work. That’s 3 hours of diagnostics I’ll never get back.

da

I’m having the same issue. When I’m holding, it works. When I’m not holding, not working!! I didn’t understand what have you done. Please help me

da

@provibe I’m having the same issue. When I’m holding, it works. When I’m not holding, not working!! I didn’t understand what have you done. Please help me

da

Aggiungi un commento

3 Risposte

Soluzione Prescelta

I would closely inspect the connectors for the digitizer on the logic board (look here) as well as the surrounding area for any tiny components that may have been knocked off. Magnification is important here as the parts are tiny.

Questa risposta è stata utile?

Punteggio 3

Commenti:

Already looked and didn't see anything, but I don't have any form of magnification with me. Will do again once I get home and have a magnifying glass. If a connector has been knocked off, what's my next course of action? What should I do if I don't see any damage?

da

If the connector or any surrounding components are damaged/missing, it will require a micro-soldering repair.

If you don't see anything with magnification then ideally you need to have this looked at by a repair shop to at least eliminate any modular component (screen, flexes etc) issues. If they can't find anything then a micro-soldering shop should be able to troubleshoot it.

da

Aggiungi un commento

It's most likely the touch filters located blow the connector. https://youtu.be/kk3mYfngY6c

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

the touch Ic chip seems to be the issue. have come across this issue in my travels, it is a rather quick repair

Questa risposta è stata utile?

Punteggio 0

Commenti:

What is the repair??

da

Aggiungi un commento

Aggiungi la tua risposta

John Smith sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 76

Ultimi 7 Giorni: 490

Ultimi 30 Giorni: 2,084

Tutti i Tempi: 57,641