Back camera not working, then front camera not working: Screen replace

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Eddie Geddy @eddiegod

Rep: 13

2

1

Postato: 6 mag 2017

Opzioni

Back camera not working, then front camera not working: Screen replace

Hi,

Before I start i would like to add that this is a different problem and have not been described from the threads ive read.

After my screen replacement on iPhone 6 I noticed that the back camera did not work, (it said it was too hot) I opened it and the back camera cable was not fully attached, I fixed it and the back camera started working, then the front camera did not work, what could have occured this?

Everything worked at first, and the front camera did work during the time the back camera was not working

Please help

Thanks in advance!

/Eddie

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

1 Commento

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

6 mag 2017 da Eddie Geddy

Aggiungi un commento

1 Risposta

Soluzione Prescelta

Minho @refectio

Rep: 221,4k

15

289

807

Postato: 6 mag 2017

Opzioni

I would go back and double check (see step 15) the connector for the front camera. It may have become partially dislodged when you fixed the back camera.

Questa risposta è stata utile?

Sì No

Punteggio 1

3 Commenti:

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

6 mag 2017 da Eddie Geddy

Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine).

6 mag 2017 da Minho

Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke.

6 mag 2017 da Eddie Geddy

Aggiungi un commento

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard. — Eddie Geddy
Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine). — Minho
Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke. — Eddie Geddy

iPhone 6

Back camera not working, then front camera not working: Screen replace

1 Risposta

Aggiungi la tua risposta