Rep: 1
1
1
I disassembled MacBook following iFixit instructions. No obviously damaged parts. There's no light when charging, nor does on/off button have any effect. This was a big spill and several parts could be damaged. Should I give up or start replacing parts, beginning with logic board? This could become expensive quickly without the ability to test individual components...
Questa è una buona domanda?
Rep: 116,3k
66
68
359
it first - use electrical contact cleaner, 99% iso-alcohol and let it dry 72 hrs.(I hope you let it dry well before you attempted to power up.)
Look for scorch marks and corrosion as you clean it with a soft brush and magnifying glass. Remember to clean/dry the back of the board. Depending upon where the liquid was spilled, and what sort of liquid it was you may get/be lucky.
Remember to return and mark accepted the answer that best solves your problem.
Good luck,
N
Questa risposta è stata utile?
A good beginning +
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 1
Tutti i Tempi: 2,030
