Salta al contenuto principale

The Kenmore Elite HE3 is a washing machine by Kenmore.

670 Domande Visualizza tutte

Clicking sound when I start waaher

When I first turn on my washer I hear a repetitive clicking sound.It runs through the cycles but I hear the sound again towards the end of the wash.Cant figure out what it is?Thanks Dave

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
1 Commento

Dave did you figure this out? I'm having the same issue, it sounds like it's coming from the pump and I hear it before the drum starts to move.

da

Aggiungi un commento

1 Risposta

Risposta Più Utile

Dave, there could be a few things making a clicking sound. First check inside machine to see if something is caught in between the outer drum and inner baskets mesh/holes, like a pen or hair pin, etc. remove if one found. Other things that could make clicking noise are worn drive belt, worn damaged pulley, bad transmission gear, clutch, relays, something stuck in pump, etc., etc..

Best to try and isolate the noise to see what area to inspect. You may have to tear the machine down a bit to locate the problem. Find a link below, the service manual to enable you to trouble shoot your machine. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Duet-Aid_also-Kenmore-HE3.pdf

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Dave Bermender sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 54

Tutti i Tempi: 8,035