Rep: 1
1
1
I pulled the wires out of the connector on the logic board in step # 17 off the HDD replacement. Does anybody now the right order to get the wires in the connector.
Or mayby is their a picture of the hdd thermal sensor cable in which I can see where each wire should be in the cnnector??
TIA Henk
Questa è una buona domanda?
Rep: 685,3k
3,4k
1,1k
2,6k
Here's a picture in step #17: Installazione dell'SSD nell'iMac Intel EMC 2105 ed EMC 2118 da 20"
Problem is the wires are all the same color. When I pulled them out I connected them back in the same order as on the sensor. It worked for me once, the next time I just order a new one in.
Questa risposta è stata utile?
good answer +
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 1,293
1 Commento
I saw the picture in #17, but I ment a picture of the entire cable so you can see how the wires are connected.
But does anyone now where to buy such a cable in the Netherlands??
Henk
da Henk