RISOLTO: How Can I Remove Stripped Screws from the Edge of 6s Screen? - iPhone 6s

How Can I Remove Stripped Screws from the Edge of 6s Screen?

Hello,

I am replacing the screen on a previosuly water damaged 6s that I have thoroughly cleaned out, and I cannot get the screws off the back plate of the screen, apart from 2... 4 are rusted in. What can I do to get them out? Thanks...

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Postato: 19 giu 2016

Opzioni

Are they the holding the backing plate on the sides of the screen? only option is to use a screw extractor or drill them out then replace

Questa risposta è stata utile?

Sì No

Punteggio 0

4 Commenti:

You can also possibly try a torx bit as well or a flathead, I managed to get a stripped logic board screw out by using the torx bit you would usually use on the bottom screws

19 giu 2016 da Brick50

Thanks, where can I fix screw extractors small enough for an iphone? heh

19 giu 2016 da ZsTech

Hello? Id like to know where I can find them I honestly ant find anything...

22 giu 2016 da ZsTech

Just drill them out with a drill bit as big as the head of the screw

26 giu 2016 da Brick50

Aggiungi un commento

iPhone 6s

How Can I Remove Stripped Screws from the Edge of 6s Screen?

1 Risposta

Aggiungi la tua risposta