Aggiusta la tua roba Comunità Store

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Domande Visualizza tutte

Opzioni

Home button not pressing

I just replaced the screen and home button. When I powered the iPad back on, the home button worked, but it had to be pressed rather hard in order to work. The button isn't squishy at all, whereas it doesn't press down hardly at all. I opened it back up to try to realign it, with no luck so far.

Keep trying to realign it or is there something I should know?

(BTW, I'm a high schooler and this is a project, so I'm a little on the novice side!)

(Just a little...)

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Hi Sarahhukill,

With the iPad 2 the home button, as you know is adhered to the back of the screen and pressing on the 2 contacts on the Dock port.

I would check the home button itself by holding it on the dock port contact and seeing if it activates properly when pressed (if it still needs to be pressed harder) it maybe that there is a fault with the Home Button and it needs replacing.

Also I would check the adhesive is properly keeping it in place and it is aligned correctly as this might be causing you to need to press the button further to create the contact.

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

sarahhukill sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 57