Salta al contenuto principale

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

729 Domande Visualizza tutte

Soldering Pad on A1395 Logic Board

Lost a couple solder pads while repairing PFC connector. I can see the copper trace where one of them goes, the other one doesn't look like it goes anywhere. Do all of the connectors have a connection? I think I could use a small piece of wire to repair the one, but not sure how to find out if the other one is actually used, and if so, where it goes. I attached a couple pictures. Thank's in advance.

Block Image

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

The second photo is VERY blurry.

The first not so much.

I have a iPad 2 at home so i'll photograph that also for you.

I'll try locate the schematic diagram for you once i'm home from work (8 hours away).

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Awesome, thank you, that would be such a help.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

jerryroncalli sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 119