Rep: 1
1
Hi there,
I would need some help trying to identify a corroded component close to the backlight connector, which is overheating constantly, in order to track my logic board issues:
Thanks in advance,
Mark
Questa è una buona domanda?
Rep: 784,3k
1,1k
894
2,3k
that is reference designator Q7530 which is a 649136PBF. It appears that this is a difficult part to find any data about. I'd try and get a donor board and harvest that. It'll be cheaper than purchasing any individual part and would provide you with more spare parts in case you'd need them. Anyhow, this is not to say what or how things failed and always consider that there are further issues. This is just to identify the part as good as possible.
Questa risposta è stata utile?
Thanks oldturkey03. It seems hard to get a spare part for this one.. any recommendations? Cheers
Go with a board that you can use for spare parts.
Thanks a lot :)
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 210
4 Commenti
Also, board is 820-3332.
I can't really read the numbers on it. As you can see from the pictures, there is some corrosion in there which doesn't help at all.
da Mark
It seems I found the schematic for it (page 66):
http://support.karat-service.net/Laptop/...
da Mark
Yes you did indeed:-)
da oldturkey03
I'll let you know how it goes, yet being a newbie doesn't help much :D
da Mark