Rep: 13
2
1
Hi everyone, i did a screen replacement of my iphone 5 but after that the front camera doesn't work anymore, i tried to reseat the connector but steel not working, could i screw up the logic board? help!!!
Questa è una buona domanda?
Rep: 30,6k
25
71
41
I have two like this and it is board damage at the very edge of the board.
Questa risposta è stata utile?
Rep: 6,1k
15
20
5
you probably damaged the front camera flex cable. they are very fragile, replace and your camera will be fine
Questa risposta è stata utile?
should it matter if the earpiece and the brightness adjuster still working?
i bought a replacement camera from ifixit as well and did the replacement, they don't work. the camera when turned on just gives a small glimpse of what it sees and then freezes, do you know what the problem is?
Questa risposta è stata utile?
Rep: 727
3
1
It seems you break the cable of front-facing camera. Can you describe more detail about the front -facing camera.
Questa risposta è stata utile?
Rep: 37,6k
22
51
42
Does the back camera work? Some times if back cameras broke it won't cycle to the front camera
Questa risposta è stata utile?
Jess do you mean damage around were the camera contacts to the motherboard?
Fire up a few pics and Jesus can compare
Yes--there is a row of very tiny SMD components between flex connector and board edge.
The other had damage to another tiny component on the other side of the connector. I will try to post a pic later
Ultime 24 Ore: 0
Ultimi 7 Giorni: 3
Ultimi 30 Giorni: 7
Tutti i Tempi: 6,753
