Need Help With HP 41C Calculator Repair

Question

HP-41C

Prodotto per la prima volta da HP nel 1979.

10 Domande Visualizza tutte

Reid @reid76351

Rep: 35

1

Postato: 2 apr 2010

Opzioni

Need Help With HP 41C Calculator Repair

Does anyone know where I might be able to get an old HP 41C Calculator repaired or where I might find information on repairing it myself. Hewlett Packard quit making these probably 20 or so years ago. I have had this one since somewhere around 1980 and it has worked until about 6 or 7 years ago. Since it quit working I have not been able to locate anyone that repairs them. Any help would be very much appreciated.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 2

Aggiungi un commento

3 Risposte

Soluzione Prescelta

markus weiher @markusweiher

Rep: 35,1k

140

71

53

Postato: 2 apr 2010

Opzioni

did you look at www.hp41.org and www.hpmuseum.org ?

there are some informations about this device - including repair stuff

Questa risposta è stata utile?

Sì No

Punteggio 3

3 Commenti:

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm

2 apr 2010 da rj713

hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics.

2 apr 2010 da markus weiher

Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph

3 apr 2010 da rj713

Aggiungi un commento

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm — rj713
hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics. — markus weiher
Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph — rj713