Salta al contenuto principale

Cricut Maker Riemen tauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Cricut Maker Belt Replacement: passo 0, immagine 1 di 2 Cricut Maker Belt Replacement: passo 0, immagine 2 di 2
  • Use a Phillips #2 screwdriver to remove the four 10 mm screws from the board on the main motor.

Benutze einen Kreuzschlitzschraubendreher #2, um die vier 10 mm Schrauben von der Platine am Hauptmotor zu entfernen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.