Salta al contenuto principale

Cricut Maker Riemen tauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 5

Passo 5
Cricut Maker Belt Replacement: passo 0, immagine 1 di 3 Cricut Maker Belt Replacement: passo 0, immagine 2 di 3 Cricut Maker Belt Replacement: passo 0, immagine 3 di 3
  • Remove the electrical tape from the connecting cable on the backside of the main motor.

  • Use the tip of a spudger or your fingernail to flip up the small locking flap.

  • Pull the cable out.

Entferne das Isolierband vom Anschlusskabel auf der Rückseite des Hauptmotors.

Benutze die Spitze eines Spudgers oder deinen Fingernagel, um die kleine Verschlussklappe hochzuklappen.

Ziehe das Kabel heraus.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.