Aggiusta le tue cose Community Store

iMac M1 24寸 拆解

Torna alla Guida
Inglese
Cinese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
iMac M1 24" Teardown: passo 0, immagine 1 di 3 iMac M1 24" Teardown: passo 0, immagine 2 di 3 iMac M1 24" Teardown: passo 0, immagine 3 di 3

  • Huzzah! The M1 iMac still uses the classic iMac adhesive—it's not quite the goopy iPad nightmare that we feared.

  • We don't love glued-together desktops—but if you insist, then this sort of split-friendly foam adhesive has been our go-to recommendation since we first encountered it in the 2012 iMac. It carves open easily with our handy-dandy cutting wheel.

  • It's not all familiar though. The surprisingly shallow cutting action is disconcertingly bumpy—fortunately, our pizza cutter is just rolling over a series of protective plastic screw posts, nothing delicate.

  • Unlike on past iMacs, it has a single piece of glass—no metal chin to block access to internals. Good slack in the cables and no booby traps!

  • We can't wait to take a look at those radiator-looking bits—could they be speaker chambers?

M1 iMac依然使用了iMac传统的粘合工艺，比iPad“友善”多了。

我们不喜欢胶水台式机。但是，这种比较好拆的黏合剂自从在2012年iMac首次引用以来一直是我们的首选。

对于这台陌生的机器，我们的切割遇到了一些波折。所幸，我们的披萨刀只是划伤了一些保护性的塑料螺丝柱，没什么损伤。

不像上代iMac，它采用了一整块玻璃作为前面板，不再有金属下巴来增加拆解难度。线缆长度适中而且没有任何扯断排线的陷阱。

我们等不及想要看看这些散热器一样的东西是什么了——会是扬声器的回音腔吗？

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.