Salta al contenuto principale

Procedura di apertura iPhone 12 mini

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 8le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
iPhone 12 mini Opening Procedure, Heat the bottom edge of the phone: passo 0, immagine 1 di 1
Heat the bottom edge of the phone
  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  • Heating the bottom edge of the iPhone helps soften the adhesive securing the display, making it easier to open.

  • Use a hair dryer or a heat gun to heat the bottom edge of the iPhone for 90 seconds or until the screen is slightly too hot to touch.

  • Never leave your hair dryer in one spot for an extended period of time.

  • If you have trouble during the opening procedure, the adhesive most likely cooled down. Apply more heat to further soften the adhesive.

Aprire lo schermo del tuo iPhone comprometterà le guarnizioni impermeabili. Tieni pronte le guarnizioni sostitutive prima di procedere al prossimo passo, o fai attenzione all'esposizione ai liquidi prima di rimontare il tuo iPhone senza sostituirle.

Scaldare il bordo inferiore dell'iPhone aiuta ad ammorbidire l'adesivo che tiene fermo lo schermo, facilitandone l'apertura.

Usa un asciugacapelli o una pistola termica per scaldare il bordo inferiore dell'iPhone per 90 secondi o finché lo schermo non è leggermente troppo caldo per essere toccato.

Non lasciare mai l'asciugacapelli nello stesso punto troppo a lungo.

Se hai problemi durante questa procedura di apertura, probabilmente l'adesivo si è raffreddato. Scaldalo di nuovo per ammorbidirlo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.