Salta al contenuto principale

Samsung Galaxy S6 Edge Vervanging van het scherm

Inglese
Olandese

Traduzione in corso passo 11

Passo 11
Samsung Galaxy S6 Edge Screen Replacement: passo 0, immagine 1 di 1
  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

Het is belangrijk dat je, voordat je je nieuwe scherm bevestigt, alle oude lijmresten uit het frame verwijdert. Let hierbij ook op dat je alle mogelijke glasresten verwijdert.

Maak de voorheen gelijmde gebieden, na het verwijderen van de resten, schoon met wat isopropyl alcohol (90+%) en een stuk stofvrij doek of een koffiefilter. Veeg altijd in dezelfde richting en niet heen en weer.

Als het frame gebogen is of als er nog lijm- of glasresten zijn achtergebleven, zal het nieuwe scherm niet goed passen en mogelijk beschadigd raken. Vervang daarom, indien nodig, ook het frame.

De beste wijze om het nieuwe scherm te bevestigen is met behulp van een stuk op maat gesneden dubbelzijdige tape. Druk de tape op de achterkant van het scherm, begeleid vervolgens de schermkabel door het frame, breng je scherm op de juiste positie en druk deze op z'n plek.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.