Aggiusta le tue cose Community Store

iPad第六代Wi-Fi版本LCD前面板更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Cinese
Passo precedente Passo successivo

Traduzione in corso passo 4

Passo 4
iPad 6 Wi-Fi LCD Replacement, Battery connector information: passo 0, immagine 1 di 3 iPad 6 Wi-Fi LCD Replacement, Battery connector information: passo 0, immagine 2 di 3 iPad 6 Wi-Fi LCD Replacement, Battery connector information: passo 0, immagine 3 di 3
Battery connector information

  • These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.

  • Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

+[title] Battery connector information
+[* icon_note] These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.
+[* icon_note] Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.