Salta al contenuto principale

Sostituzione batteria iPhone X

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
iPhone X Battery Replacement: passo 0, immagine 1 di 3 iPhone X Battery Replacement: passo 0, immagine 2 di 3 iPhone X Battery Replacement: passo 0, immagine 3 di 3
  • Grab one of the outer battery adhesive tabs and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

  • If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

  • If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed as instructed below.

Afferra una delle linguette adesive esterne della batteria e tirala lentamente, allontanandola dalla batteria, verso la parte inferiore dell'iPhone.

Tira lentamente ma esercitando una forza costante, finché la striscia non esce dal suo alloggiamento tra la batteria e il case posteriore.

La striscia si allungherà sino a varie volte la sua lunghezza originale. Continua a tirare e afferra di nuovo la striscia vicino alla batteria se necessario.

Se le strisce adesive della batteria si rompono durante la procedura di rimozione, usa le dita o delle pinzette dalla punta arrotondata per recuperare la parte rimasta della striscia e continuare a tirare.

Se una delle strisce adesive si rompe sotto la batteria e non può essere recuperata, cerca di rimuovere le strisce rimanenti e poi continua come da istruzioni successive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.