Aggiusta le tue cose Community Store

Yuneec Typhoon Q500 4K Motor Replacement

Introduzione

Many drone repairs are relatively simple, replacing a motor is a crucial fix when your drone experiences reduced performance or stops flying altogether. Motors are responsible for the drone's lift and stability, so a faulty motor can make the difference between smooth flights and frustrating crashes. It may seem like a daunting task, but replacing a motor is straightforward with the right tools and instructions.

Cosa ti serve

  1. Yuneec Typhoon Q500 4K Motor Replacement, Motor: passo 1, immagine 1 di 1

    • Remove the propeller from the side where the motor is not working.

    • You can remove the propeller at any point in the replacement.

    Modifica

  2. Yuneec Typhoon Q500 4K Motor Replacement: passo 2, immagine 1 di 2 Yuneec Typhoon Q500 4K Motor Replacement: passo 2, immagine 2 di 2

    • Grab the motor with one hand and propeller with the other.

    • Turn the propeller counterclockwise to separate the propeller from the drone.

    Modifica

  3. Yuneec Typhoon Q500 4K Motor Replacement: passo 3, immagine 1 di 1

    • Flip the drone upside down.

    Modifica

  5. Yuneec Typhoon Q500 4K Motor Replacement: passo 4, immagine 1 di 3 Yuneec Typhoon Q500 4K Motor Replacement: passo 4, immagine 2 di 3 Yuneec Typhoon Q500 4K Motor Replacement: passo 4, immagine 3 di 3

    • Use a Phillips #00 screwdriver and remove the four screws that secure the light cover.

    Modifica

  6. Yuneec Typhoon Q500 4K Motor Replacement: passo 5, immagine 1 di 1

    • Use the plastic opening tool to pry up and out the PCB.

    Modifica

  7. Yuneec Typhoon Q500 4K Motor Replacement: passo 6, immagine 1 di 2 Yuneec Typhoon Q500 4K Motor Replacement: passo 6, immagine 2 di 2

    • Use a 2mm Hex screwdriver to remove the four screws that are located below the PCB.

    Modifica

  8. Yuneec Typhoon Q500 4K Motor Replacement: passo 7, immagine 1 di 1

    • Flip the drone over then replace the motor with a new one.

    Modifica
Conclusione

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Dev Panchal

Membro da: 10/30/24

680 Reputazione

5 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cuesta, Team 10-5, Krynen Fall 2024 Membro di Cuesta, Team 10-5, Krynen Fall 2024

CUESTA-KRYNEN-F24S10G5

4 Membri

6 Guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 23

Tutti i Tempi: 103