Salta al contenuto principale

Wen 2307 Power Cable Replacement

Cosa ti serve

  1. Wen 2307 Power Cable Replacement, Front Panel: passo 1, immagine 1 di 1
    • Unscrew the locking sleeve.

  2. Wen 2307 Power Cable Replacement: passo 2, immagine 1 di 1
    • Remove the hanging clip.

  3. Wen 2307 Power Cable Replacement: passo 3, immagine 1 di 2 Wen 2307 Power Cable Replacement: passo 3, immagine 2 di 2
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Power Cable Replacement: passo 4, immagine 1 di 1
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Power Cable Replacement: passo 5, immagine 1 di 1
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Power Cable Replacement, Power Cable: passo 6, immagine 1 di 2 Wen 2307 Power Cable Replacement, Power Cable: passo 6, immagine 2 di 2
    • Identify the screws.

    • Unscrew the two 3mm phillips PH2.

    • Don't forget to put them appart from the ones unscrewed before.

    • Don't forget to put them appart from the ones unscrewed before.

    • Phillips PH2

    • Flathead 2.5mm

  7. Wen 2307 Power Cable Replacement: passo 7, immagine 1 di 1
    • Remove the place boar carefully.

  8. Wen 2307 Power Cable Replacement: passo 8, immagine 1 di 1
    • Pull out the power cable connectors.

  9. Wen 2307 Power Cable Replacement: passo 9, immagine 1 di 1
    • Pull out the cord sleve for the new cable replacement.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 12-1, Eyestone Spring 2016 Membro di USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 495