Salta al contenuto principale

Speed Switch

Cosa ti serve

  1. Speed Switch, Switch: passo 1, immagine 1 di 2 Speed Switch, Switch: passo 1, immagine 2 di 2
    • Use a phillips head screwdriver to unscrew the following 8 screws:

    • One 24mm Phillips screw

    • Six 16mm Phillips screws

    • One 9mm Phillips screw

    • Turn the drill to the other side and unscrew the marked screw using the same phillips head screwdriver. Place it with the other removed screws.

    • Keep all screws organized on a magnetic mat after removal.

  2. Speed Switch: passo 2, immagine 1 di 3 Speed Switch: passo 2, immagine 2 di 3 Speed Switch: passo 2, immagine 3 di 3
    • Carefully remove the plastic drill casing by pulling it apart.

    • When separating the drill casing, the black plastic speed switch covering will be removed from the drill automatically.

  3. Speed Switch: passo 3, immagine 1 di 2 Speed Switch: passo 3, immagine 2 di 2
    • Gently remove the orange plastic speed switch from the drill. It is located right above the motor.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 980