Introduzione

This guide shows how to remove the phone keypad.

Parti

Nessuna parte richiesta.

Remove the back cover and the battery.
  • Remove the back cover and the battery.

Aggiungi Commento

Remove the 4 screws using a T6 precision screwdriver.
  • Remove the 4 screws using a T6 precision screwdriver.

  • Flip open the phone, and keep the back cover facing you.

Aggiungi Commento

  • Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

  • Note: There are 2 clamps that lock it to the phone case (1 on each side).

Aggiungi Commento

  • Flip the phone over and lift straight up on the key pad to remove it.

  • Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 7-12, Maness Spring 2010 Membro di Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,581