Salta al contenuto principale

Sony Ericsson T68i Screen Replacement

Cosa ti serve

  1. Sony Ericsson T68i Screen Replacement, Keypad: passo 1, immagine 1 di 2 Sony Ericsson T68i Screen Replacement, Keypad: passo 1, immagine 2 di 2
    • Remove the battery from the back.

  2. Sony Ericsson T68i Screen Replacement: passo 2, immagine 1 di 3 Sony Ericsson T68i Screen Replacement: passo 2, immagine 2 di 3 Sony Ericsson T68i Screen Replacement: passo 2, immagine 3 di 3
    • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

    • Do not bend it too far down, or else you risk breaking the two bottom clips.

  3. Sony Ericsson T68i Screen Replacement: passo 3, immagine 1 di 3 Sony Ericsson T68i Screen Replacement: passo 3, immagine 2 di 3 Sony Ericsson T68i Screen Replacement: passo 3, immagine 3 di 3
    • Unscrew all four Torx T6 screws.

    • Keep in a safe place.

  4. Sony Ericsson T68i Screen Replacement: passo 4, immagine 1 di 3 Sony Ericsson T68i Screen Replacement: passo 4, immagine 2 di 3 Sony Ericsson T68i Screen Replacement: passo 4, immagine 3 di 3
    • After removing the screws, the two halves will separate. If not, then pry them gently apart.

  5. Sony Ericsson T68i Screen Replacement, Screen: passo 5, immagine 1 di 3 Sony Ericsson T68i Screen Replacement, Screen: passo 5, immagine 2 di 3 Sony Ericsson T68i Screen Replacement, Screen: passo 5, immagine 3 di 3
    • Remove the circuit board and screen from the device.

    • Use your T6 to remove the 4 screws.

  6. Sony Ericsson T68i Screen Replacement: passo 6, immagine 1 di 3 Sony Ericsson T68i Screen Replacement: passo 6, immagine 2 di 3 Sony Ericsson T68i Screen Replacement: passo 6, immagine 3 di 3
    • Remove the board and screen.

  7. Sony Ericsson T68i Screen Replacement: passo 7, immagine 1 di 3 Sony Ericsson T68i Screen Replacement: passo 7, immagine 2 di 3 Sony Ericsson T68i Screen Replacement: passo 7, immagine 3 di 3
    • Carefully remove the plastic clips holding the screen on the board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tim Dascomb

Membro da: 04/13/10

159 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 26-34, Regan Spring 2010 Membro di Cal Poly, Team 26-34, Regan Spring 2010

CPSU-REGAN-S10S26G34

4 Membri

13 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,707