Cosa ti serve
-
-
-
Power on the device, eject the disk tray, and power off the device.
-
Turn the device over.
-
Lightly apply downward pressure on the black covering on the disk tray until it comes off.
Chiedi a FixBot
-
-
-
Turn the device around.
-
Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
-
Slide the side covers on either side towards the back of the device.
-
-
-
Turn the device so that the bottom is facing up.
-
In the bottom, unclip the three plastic clips circled in red.
-
On either side, unclip the plastic clip circled in red
-
Slide the black covering forwards to remove.
-
-
-
-
-
-
Gently pull on up on the power cord to unlatch it from the metal body of the device.
-
-
-
Remove the cable connecting the Power Port to the Motherboard by pulling up.
-
-
-
Lift the Power Module up from the side. See picture.
-
Pull up and away to remove the Power Module
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-6, Lacy Fall 2016 Membro di USF Tampa, Team 1-6, Lacy Fall 2016
USFT-LACY-F16S1G6
4 Membri
30 guide realizzate
