Introduzione
The SodaStream Source is battery operated. But If you are experiencing trouble with your device, and you have replaced the battery, it could be the microchip needs to be replaced. This guide will assist you in removing the carbonation block to access the microchip and replace it.
Cosa ti serve
-
-
-
Remove the soda bottle and the CO₂ canister from the machine.
Chiedi a FixBot
-
-
Strumento utilizzato in questo passaggio:Phillips #1 Screwdriver$8.99
-
Remove the four 17.8 mm screws from the bottom metal base using a Phillips #1 screwdriver.
-
-
-
Strumento utilizzato in questo passaggio:Phillips #1 Screwdriver$8.99
-
Remove the two 18.2 mm screws from the bottom of the front cover using a Phillips #1 screwdriver.
-
-
Strumento utilizzato in questo passaggio:Jimmy$7.95
-
Firmly pull the front cover off.
-
-
-
-
-
Wedge the plastic spudger between the microchip and the glue dot until the glue pops off.
-
-
Strumento utilizzato in questo passaggio:Spudger$2.99
-
Use the spudger to lift the edge of the wire and pull the wire out of the microchip.
-
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Team
USF Tampa, Team S1-G4, Leahy Spring 2017 Membro di USF Tampa, Team S1-G4, Leahy Spring 2017
USFT-LEAHY-S17S1G4
3 Membri
48 guide realizzate
4Commenti sulla guida
Great information, but is there someone out there offering this repair as a service, I’m not motivated enough to do this myself and happy to pay someone to do it for me
Where can you purchase a replacement microchip from?
Where can I find the reassemble source at
