Introduzione
This guide will show how to remove the Back LCD Screen.
Cosa ti serve
-
-
-
Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
-
Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
-
Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.
Chiedi a FixBot
-
-
-
-
Remove the front case of the camera.
-
Remove the front LCD screen from the front case next to the lens.
-
-
-
-
-
Remove the back LCD screen from its place carefully.
-
-
-
Flip the black tab where the back LCD screen connects to the circuit board.
-
Pull the tape connection to disconnect the back LCD screen from the circuit board.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
Team
Baylor, Team 5-10, Williams Spring 2015 Membro di Baylor, Team 5-10, Williams Spring 2015
BU-WILLIAMS-S15S5G10
3 Membri
10 guide realizzate
