Salta al contenuto principale
Proscan Tablet Camera Replacement

Proscan Tablet Camera Replacement

Cameron Denny

Cameron Denny e 3 altri collaboratori

Ultimo aggiornamento il April 27, 2019

Nessuna stima
Moderato
Necessarie Immagini Migliori
Introduzione Migliore

Cosa ti serve

Strumenti

Mostra di più…

  1. Proscan Tablet Camera Replacement, Camera: passo 1, immagine 1 di 1
    • Tools necessary for task. Starting from the left to right Metal Spudyer Plastic opening tool Precision tweezer Point pen tool Driver with bit size J0

  2. Proscan Tablet Camera Replacement: passo 2, immagine 1 di 1
    • The backing of the tablet is fastened by simply snapping it in. Using the metal opening tool, pry between the plastic backing and the edge, but do not remove it yet. Work your way around until you have them separated.

  3. Proscan Tablet Camera Replacement: passo 3, immagine 1 di 1
    • Once you have finished going around the edges of the tablet, look inside.

  4. Proscan Tablet Camera Replacement: passo 4, immagine 1 di 1
    • You can directly locate and remove the camera component in the corner. Simply unscrew the piece and gently remove the tape wire.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 400