Aggiusta le tue cose Community Store

Pokewalker Button Replacement

Introduzione

How to Replace a Cracked or Broken Button on a Pokewalker

Cosa ti serve

  1. Pokewalker Button Replacement, Battery: passo 1, immagine 1 di 1

    • Locate the Screw on the Back of the Pokewalker.

    Modifica

  2. Pokewalker Button Replacement: passo 2, immagine 1 di 1

    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

    Modifica

  3. Pokewalker Button Replacement: passo 3, immagine 1 di 1

    • Remove the Rear Cover from the Device

    Modifica

  4. Pokewalker Button Replacement: passo 4, immagine 1 di 1

    • Use the flat end of a Spudger to Remove the Battery

    Modifica

    • Locate the 4 Screws Around the Device

    Modifica

    • Remove all 4 screws with a Y0 Triwing Screwdriver

    Modifica

    • Separate the 2 halves of the Device

    • Do not Separate Completely as the Display is Still Connected by a Ribbon Cable

    Modifica

  9. Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Acquista

    • Use a Spudger to Flip the Latch holding the ribbon cable in place and use Tweezers to Pull it out

    • Do not use Excessive force when reinserting the cable, because ribbon cables are fragile

    Modifica

    • Remove the Rubber-button thingy from the upper case

    • I have no idea what that thing is, edit this guide if you do.

    Modifica

    • Remove the 3 Plastic Buttons from the Case

    • It helps that the buttons only go in one way, makes it easier to reassemble

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Winni Stuart

Membro da: 04/13/14

447 Reputazione

2 Guide realizzate

Distintivi: 11

+8 altri distintivi

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 16

Tutti i Tempi: 838