Introduzione

If you know that your screen needs to be replaced, this guide will show you how to do so.

  1. Unscrew the two 7.35mm Torx T6 screws.
    • Unscrew the two 7.35mm Torx T6 screws.

    Aggiungi Commento

  2. Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
    • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

    Aggiungi Commento

    • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

    Aggiungi Commento

    • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

    Aggiungi Commento

    • Carefully pull back the brown cable holders and separate the screen from the motherboard.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gabe

Membro da: 23/01/2011

501 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-21, Amido Winter 2011 Membro di Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 2,202