Parti

Nessuna parte richiesta.

Make sure your Palm Pre is turned off before disassembling the phone.
  • Make sure your Palm Pre is turned off before disassembling the phone.

  • Snap off the back panel to reveal the battery.

Aggiungi Commento

Carefully pull up on the tab to remove the current battery.
  • Carefully pull up on the tab to remove the current battery.

Aggiungi Commento

  • Use the t4 screwdriver to remove all 6 of the 3.6mm long screws.

Aggiungi Commento

  • Use the spudger to locate the crease at the bottom of the keyboard.

  • Carefully work your way around the phone separating the back frame from the keyboard.

Aggiungi Commento

  • Use tweezers to remove the DIV and GPS antennas from the back of the keyboard.

Aggiungi Commento

  • Use the spuger to pry out the speaker. It is magnetically connected so do not be afraid to use the necessary force.

    • Make sure to take note of the orientation of the speaker for re-installation.

    • Make sure not the puncture the screen on the outside of the back frame.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

noha

Membro da: 12/04/2012

139 Reputazione

12 Guide realizzate

Team

Cal Poly, Team 7-31, Maness Spring 2012 Membro di Cal Poly, Team 7-31, Maness Spring 2012

CPSU-MANESS-S12S7G31

3 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,053