Introduzione

Follow this guide to remove and replace your Palm IIIc's battery.

Parti

Nessuna parte richiesta.

  1. Keep track of all pieces removed from the device.
    • Keep track of all pieces removed from the device.

    • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

    Aggiungi Commento

  2. Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
    • Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

    • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

    Aggiungi Commento

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Lay Palm IIIc face-up and remove the front cover.

    • Do this firmly but not with too much force so as to not break or disturb anything you're not supposed to.

    Aggiungi Commento

    • Carefully pop out the battery, without disturbing the surroundings.

    • Prying tool will facilitate this step.

    Aggiungi Commento

    • Detach the wire connecting the battery to the motherboard.

    Aggiungi Commento

    • Attach the new battery by connecting it to the motherboard via the red wire.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Paulina Trujillo

Membro da: 07/04/2011

241 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 20-69, Walters Spring 2011 Membro di Cal Poly, Team 20-69, Walters Spring 2011

CPSU-WALTERS-S11S20G69

5 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 3,203