Introduzione

This is instructions on how to open up the phone to get to the insides.

Parti

Nessuna parte richiesta.

Press and slide open the battery cover.
  • Press and slide open the battery cover.

Aggiungi Commento

Caution: Turn cell phone off before removing battery!
  • Caution: Turn cell phone off before removing battery!

  • Press battery to the right.

  • Then lift up battery pack to remove.

Aggiungi Commento

  • Phone with battery removed

Aggiungi Commento

  • Remove the touchpad pen from the top left corner on the back to reveal the last of 6 screws to be removed.

Aggiungi Commento

    • Lift the rubber cap at the top right to reveal the sixth screw.

    • Caution: There is a small Palm sticker under the rubber cap. Tampering with or removing this sticker will void your warranty!

    • Remove the six screws using the T5 Torx screwdriver.

Aggiungi Commento

  • Remove the SIM card so housing can be separated.

Aggiungi Commento

  • Use a plastic pry tool to separate the bottom of the case to remove the small plastic insert.

Aggiungi Commento

  • Remove the small plastic insert at the bottom of the phone.

Aggiungi Commento

  • Continue with plastic pry tool all the way around the phone to remove the back housing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

Cal Poly, Team 15-49, Garner Spring 2010 Membro di Cal Poly, Team 15-49, Garner Spring 2010

CPSU-GARNER-S10S15G49

5 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,613