Aggiusta la tua roba Comunità Store

Pacific Image Electronics CS3600 Button Spring Replacement

Introduzione

Before beginning, please know that you will be completely taking apart the device in order to get to the button from the inside.

Cosa ti serve

  1. Pacific Image Electronics CS3600 Button Spring Replacement, Button Spring: passo 1, immagine 1 di 1

    • Begin opening the device by unscrewing the 5 following 9mm x 7mm screws with a J1 screwdriver.

    Modifica

  2. Pacific Image Electronics CS3600 Button Spring Replacement: passo 2, immagine 1 di 1

    • Once the screws have been removed, with light force open the scanner by pulling it apart at the seam.

    Modifica

  4. Pacific Image Electronics CS3600 Button Spring Replacement: passo 3, immagine 1 di 1

    • With a JIS J0 screwdriver remove the 1 screw that is 7mm x 6mm.

    Modifica

  5. Pacific Image Electronics CS3600 Button Spring Replacement: passo 4, immagine 1 di 1

    • Lift and move the plate with the connected wires out of the way.

    Modifica

  6. Pacific Image Electronics CS3600 Button Spring Replacement: passo 5, immagine 1 di 1

    • Remove the spring and replace it with a new one.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Amber Berry

Membro da: 03/21/17

101 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

Team

Texas Tech, Team S46-G2, Bennett Spring 2017 Membro di Texas Tech, Team S46-G2, Bennett Spring 2017

TTU-BENNETT-S17S46G2

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 181