Introduzione

To complete this repair you will need a Torx number 4

Parti

Nessuna parte richiesta.

Remove battery
  • Remove battery

Aggiungi Commento

Using Torx number 4 unscrew the four  0.5mm screws.
  • Using Torx number 4 unscrew the four 0.5mm screws.

Aggiungi Commento

  • Push in four clips to detach the body.

Aggiungi Commento

  • Separate the body into two pieces.

  • Be careful not to damage the screen or body. Some force will be needed to separate the body.

Aggiungi Commento

  • Remove the bottom piece that is clipped on.

  • Some force will need to be exerted to remove the clip.

Aggiungi Commento

  • Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.

Aggiungi Commento

  • Once screws are removed detach back of phone from the motherboard.

  • This will require some force and maneuvering. Be careful not to break phone back or motherboard.

Aggiungi Commento

  • Replace motherboard, ensure that replacement has the same serial number.

Aggiungi Commento

  • Carefully un-clip camera ribbon. Install new camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Will Goldby

Membro da: 29/08/2011

184 Reputazione

4 Guide realizzate

Team

Cuesta, Team 1-1, Zipperian Fall 2011 Membro di Cuesta, Team 1-1, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G1

3 Membri

4 Guide realizzate

Will a Nokia E72 replacement camera part work in the Nokia E71 motherboard? In other words, can one upgrade the Nokia E71’s 3.2 MP camera to 5.0 MP using a spare part made for an E72?

Gam - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,123