Introduzione
Not being able to charge your device may mean you have a bad capacitor. Follow these simple steps to get yours replaced.
Cosa ti serve
-
-
-
Turn over the device so that the back of the device is facing up.
Chiedi a FixBot
-
-
-
Insert the first plastic opening tool along the side to pry open the case.
-
Use a second plastic opening tool to help separate the remaining seams.
-
-
-
-
Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.
-
-
-
Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.
-
Remove the solar panel and circuit board from the front case.
-
-
-
-
-
Use the soldering station to desolder the two contact points around the connections of the capacitor to loosen the metal.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 9-3, Blackwell Winter 2015 Membro di USF Tampa, Team 9-3, Blackwell Winter 2015
USFT-BLACKWELL-W15S9G3
3 Membri
6 guide realizzate
