Introduzione
Sometimes the back panel of the watch starts to peel or breaks. The steps in this guide will tell you how to remove it so it is ready for replacement.
Cosa ti serve
-
-
-
Face the watch upside down, so that the back of the watch is exposed. Unscrew the six #000 size 5 mm long screws on the back using a size 000 Phillips head screwdriver.
Chiedi a FixBot
-
-
-
Carefully separate the watch by pulling the band away from the main board.
-
-
-
-
Pry the black plastic piece above the battery out using a nylon or metal spudger.
-
-
-
Using a guitar pick removal tool, push under the battery to pry the battery out of the watch.
-
-
-
After taking the battery out, you will be left with just the band and the backpanel part of the watch.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Team
UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Membro di UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015
UMASSD-GULBRANDSEN-F15S5G8
3 Membri
5 guide realizzate
