Monster DNA Speaker Replacement

Unisciti alla Community delle riparazioni - Crea un account

Introduzione

The sound can sometimes get muffled through both earpieces which probably means there is an issue in the speakers. If the speakers themselves are the problem, then there may not be much of a chance of repairing the existing pair. If the speaker is not functioning properly it may need to be replaced altogether.

Cosa ti serve

1. Passo 1 Speaker
  Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.
  Traduci
  
  Chiedi a FixBot
  
  Aggiungi Commento
  
  1024
2. Passo 2
  Desolder the wires to completely remove the speaker.
  
  Take note of the proper location of the wires reassembly.
  Traduci
  
  Chiedi a FixBot
  
  Aggiungi Commento
  
  1024
4. Passo 3
  Use a heatgun to loosen the glue holding down the speaker.
  
  Be careful to take safety precautions such as gloves as not to cause injury.
  Traduci
  
  Chiedi a FixBot
  
  Aggiungi Commento
  
  1024
5. Passo 4
  Pry the speaker out using a plastic opening tool or metal spudger.
  
  Using too much force will damage the headphones and the new speaker may not go back into place properly.
  Traduci
  
  Chiedi a FixBot
  
  Aggiungi Commento
  
  1024
6. Passo 5
  Insert new speaker and solder the five wires into corresponding positions onto the new speaker.
  Traduci
  
  Chiedi a FixBot
  
  Aggiungi Commento
  
  1024