Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

The kickstand of your Microsoft Surface Pro 5 is a convenient feature of the device, but if it breaks off or stops holding your tablet upright, you may want to replace it. Follow this guide to replace the kickstand of your Microsoft Surface Pro 5. This is a quick and easy repair that will greatly improve the usability of the Surface Pro 5.

  1. Lift the kickstand about 90º to reveal the hinges. Lift the kickstand about 90º to reveal the hinges. Lift the kickstand about 90º to reveal the hinges.
    • Lift the kickstand about 90º to reveal the hinges.

  2. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Remove the four 2.7 mm T3 Torx screws, two from each hinge. Remove the four 2.7 mm T3 Torx screws, two from each hinge.
    • Remove the four 2.7 mm T3 Torx screws, two from each hinge.

  4. Lower the kickstand to about a 15-30º angle from the device. Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.
    • Lower the kickstand to about a 15-30º angle from the device.

    • Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.

    • During reassembly, be sure to reinsert the two adhesive tabs into the slots on the back of the device before installing the screws in the hinges.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sarah Westberg

Membro da: 11/03/2019

3.790 Reputazione

22 Guide realizzate

Team

iFixit Membro di iFixit

Community

125 Membri

11.809 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 28

Ultimi 30 Giorni: 112

Tutti i Tempi: 824