Introduzione
This is a prerequisite guide that will instruct you on how to properly open your keyboard. This will be helpful for replacing internal components without damaging your device.
Cosa ti serve
-
-
-
-
Peel off the center sticker to reveal two hidden 4.0 mm screws.
-
Unscrew these two screws with a Phillips #1 screwdriver.
-
-
-
Lift both top left and top right rubber stickers halfway, using the sharp end of the plastic spudger.
-
Unscrew a total of two 4.0 mm screws, under the rubber stickers, using a Phillips #1 screwdriver.
-
-
-
Unscrew the top center 4.0 mm screw, in the battery compartment, using the Phillips #1 screwdriver.
-
-
-
Wedge the flat end of the spudger between the back panel and front panel.
-
Slide the flat end of the spudger from right to left to pry the two panels apart.
-
-
-
Separate the back panel from the front panel completely, using both hands.
-
Chiedi a FixBot
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Team
CSU Fullerton, Team S1-G2, Bruce Fall 2017 Membro di CSU Fullerton, Team S1-G2, Bruce Fall 2017
CSUF-BRUCE-F17S1G2
3 Membri
45 guide realizzate
