Introduzione
Use this guide to replace broken, torn or ugly buttons on your InFocus Remote.
Cosa ti serve
-
-
-
Use your finger to press the tab on the battery cover.
-
Lift the cover up and out.
Chiedi a FixBot
-
-
-
Use your finger to lift the two AA batteries up and out of the remote.
-
-
-
Remove the three 9mm Phillips #00 screws located on the backside of the remote.
-
-
-
-
Insert a plastic opening tool into the seam between the black top cover and silver base at the bottom edge of the remote.
-
Carefully pry the top cover up and away from the base.
-
-
-
Insert an opening pick into the seam on side of the remote, even with the InFocus Label.
-
Slide the opening pick along the side of the remote, moving towards the buttons.
-
-
-
Repeat the previous step on the other side of the remote, working from the InFocus label towards the buttons until the entire cover is loose.
-
-
-
To reassemble your device, follow these instructions in reverse order.
