Menü

Le tue impostazioni

Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi
Il Mio Carrello

Sembra che il tuo carrello sia vuoto

Sfoglia il Nostro Negozio

HTC Maple 100 LCD Screen Replacement

Scritto Da: Nick (e 4 altri collaboratori)
  • Commenti: 0
  • Preferiti: 1

Difficoltà

Moderato

Passi

13

Tempo Necessario

20 minuti

Sezioni

4

Contrassegni

2

Missing Prerequisites

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Confusing Text

Testo Confuso

Parte del testo di questa guida è confusionario, doppio, o fuori tema. Modificarlo per renderlo più chiaro!

Introduzione

Be careful with the LCD screen. It is fragile.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte richiesta.

  1. First remove the back cover of your phone to expose the battery.

    • First remove the back cover of your phone to expose the battery.

    Traduci

  2. Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

    • Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

    Traduci

  3. Take the battery out When reassembling, make sure that the battery contacts match up.

    • Take the battery out

    • When reassembling, make sure that the battery contacts match up.

    Traduci

  4. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

    Traduci

  5. Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

    • Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

    Traduci

  6. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

  7. Use the plastic opening tool to pry the clips off Insert the plastic opening tool along the seams at different points to it pry up This may require a bit of force. The USB port cover may fall off in this step.

    • Use the plastic opening tool to pry the clips off

    • Insert the plastic opening tool along the seams at different points to it pry up

    • This may require a bit of force. The USB port cover may fall off in this step.

    Traduci

  8. Remove the one 3.3mm #00 screw. Remove the one 3.3mm #00 screw.

    • Remove the one 3.3mm #00 screw.

    Traduci

  9. Use your finger or the plastic opening tool to unclip the board. Be aware of the ribbon cable connected to the motherboard inside the phone.

    • Use your finger or the plastic opening tool to unclip the board.

    • Be aware of the ribbon cable connected to the motherboard inside the phone.

    Traduci

  10. Peel off the yellow piece of tape from the phone Peel off the yellow piece of tape from the phone

    • Peel off the yellow piece of tape from the phone

    Traduci

  11. First flip up the retaining flap with your fingernail or a plastic opening tool. Pull on the ribbon cable gently with your fingers Pull on the ribbon cable gently with your fingers

    • First flip up the retaining flap with your fingernail or a plastic opening tool.

    • Pull on the ribbon cable gently with your fingers

    Traduci

  12. Split apart the motherboard and front panel. Remove the other yellow piece of tape off of the end of the ribbon cable. Split apart the motherboard and front panel. Remove the other yellow piece of tape off of the end of the ribbon cable.

    • Split apart the motherboard and front panel. Remove the other yellow piece of tape off of the end of the ribbon cable.

    Traduci

  13. Gently pull on the ribbon cable to separate the motherboard. Gently pull on the ribbon cable to separate the motherboard.

    • Gently pull on the ribbon cable to separate the motherboard.

    Traduci

  14. Pry the LCD screen out using the plastic opening tool and remove it using your fingers. Pry the LCD screen out using the plastic opening tool and remove it using your fingers. Pry the LCD screen out using the plastic opening tool and remove it using your fingers.

    • Pry the LCD screen out using the plastic opening tool and remove it using your fingers.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Nick

Membro da: 28/10/2011

6 Reputazione

3 Guide realizzate

Distintivi: 3

Team

Cal Poly, Team 20-29, Maness Fall 2011 Membro di Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,001