Salta al contenuto principale

HP Spectre x360 15" (15t-ap000) Back Cover Replacement

Cosa ti serve

  1. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Unscrew the back cover: passo 1, immagine 1 di 1
    • Be sure to completely power off and unplug your laptop before you begin your repair. Make sure the laptop is not in standby, sleep, or hibernation mode.

    • Use a T5 driver to remove the following screws securing the back cover:

    • Six 4 mm-long screws

    • Two 7.8 mm-long screws

  2. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: passo 2, immagine 1 di 2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: passo 2, immagine 2 di 2
    • Use an opening tool or your fingers to pry up the back cover from the laptop.

    • Plastic clips hold the back cover lightly in place, so you may encounter some resistance.

    • If it feels like there is strong resistance, you may have a model that includes screws under the corner feet. Carefully pry the feet up to make sure they don't have screws.

  3. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: passo 3, immagine 1 di 2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: passo 3, immagine 2 di 2
    • Lift and remove the back cover.

    • During reassembly, gently press along the perimeter of the back cover to re-engage the clips.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Un'altra persona ha completato questa guida.

Arthur Shi

Membro da: 01/03/18

253.419 Reputazione

526 Guide realizzate

Team

iFixit Membro di iFixit

Staff

135 Membri

17.198 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 43

Tutti i Tempi: 2,339