Parti

Nessuna parte richiesta.

Eject the battery from the computer by sliding the two clips on the bottom of the computer toward the center of the computer.
  • Eject the battery from the computer by sliding the two clips on the bottom of the computer toward the center of the computer.

  • Slide the battery out as shown in the picture.

Aggiungi Commento

Once keyboard is loose, do not immediately remove it from the computer. It is attached by a ribbon connector.
  • Once keyboard is loose, do not immediately remove it from the computer. It is attached by a ribbon connector.

  • Using a metal wedge tool, pry up along the top edge of the keyboard until all clips are disengaged and the keyboard is loose from the computer.

Aggiungi Commento

  • To disconnect the ribbon connector, flip up the black clip shown in the picture.

  • Gently pull the ribbon until disconnected.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 87