Salta al contenuto principale

Gateway SA1 Disk Drive Replacement

Cosa ti serve

  1. Gateway SA1 Disk Drive Replacement, Battery: passo 1, immagine 1 di 1
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Disk Drive Replacement: passo 2, immagine 1 di 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Disk Drive Replacement, Disk Drive: passo 3, immagine 1 di 1
    • Unscrew the marked 5.9 mm Philips screw.

  4. Gateway SA1 Disk Drive Replacement: passo 4, immagine 1 di 1
    • Use the spudger to pry out the Disk dive.

  5. Gateway SA1 Disk Drive Replacement: passo 5, immagine 1 di 1
    • The disk drive should easily detach and can now be replaced.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 24-20, Regan Spring 2010 Membro di Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 3,441