Introduzione

Use this guide to remove the battery cover and battery from the Game Boy.

Parti

Nessuna parte richiesta.

Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.
  • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

  • Once the screw has been loosened, lift the cover off the back of the device.

Aggiungi Commento

Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.
  • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

  • Gently grab the wires.

I heard of someone doing this and the connecter got stuck in the plug. Is there any other way to do it?

Lucas Hoekstra (Lucas9810) - Replica

  • Carefully pull the wires until the connector comes out of the device.

  • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

  • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Jack

Membro da: 21/01/2010

243 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 8-46, Regan Winter 2010 Membro di Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

5 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 55

Tutti i Tempi: 10,739