Salta al contenuto principale

Introduzione

If the laptop is sluggish or is running out of storage then the RAM may need to be replaced, this guide will show you how to remove the RAM from the Fujitsu Lifebook S6120.

Parti

Nessuna parte specificata.

  1. To prevent injury, make sure the laptop is unplugged and turned off before removing the battery. Push the two tabs in towards the laptop. Lift the battery up and out from the frame of the laptop.
    • To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

    • Push the two tabs in towards the laptop.

    • Lift the battery up and out from the frame of the laptop.

  2. Use a Philips head #0 to remove the 4mm screws to the RAM cover. Use a Philips head #0 to remove the 4mm screws to the RAM cover.
    • Use a Philips head #0 to remove the 4mm screws to the RAM cover.

  3. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  4. Use the plastic opening tool to lift the RAM cover. Use your hands to slide the cover off. Use your hands to slide the cover off.
    • Use the plastic opening tool to lift the RAM cover.

    • Use your hands to slide the cover off.

  5. Remove RAM module by pushing security clips outward. The RAM module should pop out. Carefully pull RAM module out of the computer.
    • Remove RAM module by pushing security clips outward.

    • The RAM module should pop out.

    • Carefully pull RAM module out of the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jessi Gallant

Membro da: 19/03/2018

893 Reputazione

7 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 51