Introduzione
This guide will help you replace the USB spring should it need replacement. The only tool needed is the Phillips #1 Screwdriver. It should only take 10 minutes.
Cosa ti serve
-
-
-
Unlock the battery cover by sliding the switch to the unlock position.
Chiedi a FixBot
-
-
-
-
Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.
-
-
-
Remove the top casing from the bottom to reveal the inner circuit board.
-
-
-
Using the Phillips head screwdriver, disconnect spring from the plastic nubs.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 5-7, Martin Fall 2016 Membro di UMass Dartmouth, Team 5-7, Martin Fall 2016
UMASSD-MARTIN-F16S5G7
3 Membri
10 guide realizzate
